13 July 2020 to 30 September 2020
Online
Europe/Warsaw timezone

Accepted topics of practice

17 out of 17 displayed
  1. Filip Protoklitow (Warsaw University of technology, Faculty of Mechatronics)

    The task is to prepare the software for an automatic face recognition. The task should be done in the C++ programming language with use of the OpenCV library.
    Required basic C++ knowledge. General knowledge of digital image processing algorithms can be helpful as well as knowledge of the OpenCV library, however it is not necessary. The task at the initial stage will be realised by utilizing...

    Go to contribution page
  2. Arkadiusz Chłopik (NCBJ-Swierk/JINR)

    Laboratory of High Energy Physics (LHEP) Engineering Support

    Supervisor: MSc. Arkadiusz Chłopik, LHEP Dubna and NCBJ-Świerk Poland
    Contact: a.chlopik@ncbj.gov.pl, chlopik@jinr.ru

    The topic of the exercise
    "Automatic handler of the FHT 192-10 dosimetry detector with use of the FHT 6020 display and communication unit, RS-485 bus and the LabVIEW™...

    Go to contribution page
  3. Krystian Roslon (WUT, JINR)

    Simulator of SIEMENS S7-1200 that can be used for a various engineering tasks for NICA-MPD-PLATFORM. Student should doenwload the simulator of PLC S7-1200 and the STEP7 software for preparing the code that can be uploaded to the PLC. The first step is to preapre the configuration (naming the I/O and so on according to the device that are available in the laboratory) for S7-1200 that can be...

    Go to contribution page
  4. Krystian Roslon (WUT, JINR)

    Simulator of SIEMENS S7-1500 that can be used for a various engineering tasks for NICA-MPD-PLATFORM. Student should doenwload the simulator of PLC S7-1500 and the STEP7 software for preparing the code that can be uploaded to the PLC. The first step is to preapre the configuration (naming the I/O and so on according to the device that are available in the laboratory) for S7-1200 that can be...

    Go to contribution page
  5. Krystian Roslon (WUT, JINR)

    The cooling system for RACKs cabinets has been already proposed, however it works using LUMEL SM4 modules. It is going to be updated and replaced with Siemens S7-1200/1500. To do it, the first step is preparing the simulation withe the exact code that can be uploaded to the PLC. The effect of the work will be exchanging the control device for the cooling system.

    Requirements: English B2,...

    Go to contribution page
  6. Marcin Bielewicz (NCBJ / JINR)

    Laboratory of High Energy Physics (LHEP)
    Engineering Support

    PhD Marcin Bielewicz Laboratory: VBLHE Dubna and NCBJ-Świerk Poland
    Msc. Arkadiusz Chłopik Laboratory: VBLHE Dubna and NCBJ-Świerk Poland

    Contact: marcin.bielewicz@ncbj.gov.pl; arkadiusz.chlopik@ncbj.gov.pl

    The topic of the exercise:

    **"Cosmic ray measurements in automation cycle using Python...

    Go to contribution page
  7. Krystian Roslon (WUT, JINR)

    MPD-ITS is one of the subdetector of MPD. It based of silicon detectors and produce a huge amount of heat. Also, it is located very close to MPD-TPC which is very sensitive to the temperature gradient. Due to this fact, the gradient of the temperature on the MPD-ITS has to be minimalized. To do that, cooling plans and cooling RACKs have to be located somewhere in the area of MPD. The task is...

    Go to contribution page
  8. Mrs Michalina Milewicz-Zalewska (Warsaw University of Technology)

    During this practice, student will learn what is Equipment Database, what is its role in the NICA project and how it works. It will be hands-on experience and a chance to improve the existing database structure. Result of this practice will be a manual for new users on how to use the database and where to find which data. Manual will be written in LaTeX so basic knowledge will be useful,...

    Go to contribution page
  9. Maciej Czarnynoga (WUT)

    Heat transfer simulation of the cooling system for NICA-MPD-Platform RACK cabinet

    Contact to the supervisor: czarnynoga@jinr.ru

    Description of topic:
    The main goal of this internship topic is to conduct heat transfer simulation for the NICA-MPD-Platform RACK cabinet which using a new cooling system. Exactly for a set of two RACKs and one cooling cabinet. During the practice, student get...

    Go to contribution page
  10. Krystian Roslon (WUT, JINR)

    It is believed that up to a few milliseconds after the Big Bang, the Universe was in the state called Quark-Gluon Plasma (QGP). Moreover, this unique state should be available in the cores of neutron stars. What is QGP really? The matter that exists everywhere is built with quarks and gluons. In the ordinary matter quarks are confined in hadrons (baryons (example: protons), mesons (example:...

    Go to contribution page
  11. Arkadiusz Chłopik (NCBJ-Swierk/JINR)

    Laboratory of High Energy Physics (LHEP) Engineering Support

    Supervisor: MSc. Arkadiusz Chłopik, LHEP Dubna and NCBJ-Świerk Poland
    Contact: a.chlopik@ncbj.gov.pl, chlopik@jinr.ru

    The topic of the exercise
    "Modification of the existing LabVIEW™ code for Dosimetry System using the Finite State Machine architecture"

    Goal
    During nearly two years of work on the...

    Go to contribution page
  12. Adam Kisiel (Warsaw University of Technology)

    MPD experiment requires running a massively parallel computing tasks (hundreds of thousands of jobs) for the simulation of physics processes and MPD detector response. The advanced management, monitoring and reporting for such large-scale tasks is required. The task involves development and/or application of proper management, monitoring and reporting tools for routine operation of the...

    Go to contribution page
  13. Adam Kisiel (Warsaw University of Technology)

    Analysis of large-scale datasets (Big Data), produced with Monte-Carlo models of heavy ion collisions at NICA. Determination of basic detector performance characteristics (efficiency, momentum resolution, tracking, particle identification). Determination of Data Quality monitoring tools for large scale datasets.
    Work involves usage of the MPDRoot software - C++ programming and physics data analysis.

    Go to contribution page
  14. Daniel Dąbrowski (Warsaw University of Technology)

    The currently used pressure control algorithm inside the TOF / MPD detector chambers has been prepared for testing only one module at a time. Currently, one to four modules are used, therefore it is necessary to adapt the control algorithm to the new conditions. At first, PID controller settings should be tuned to the optimum values, for all the four corresponding setups - from one to four...

    Go to contribution page
  15. Ilya Shmyrev (JINR)

    Developing of the software that simulates the algorithms of Fire Protection System (FPS) based on LabVIEW.

    The set of input signals forms the general state of the system, according to which the fire extinguishing algorithm starts and the alarm signals are turned on.

    GUI should have these features:

    1) RUN Panel:
    - Input modules states (Sensors, Push Button, Door and etc.) –...

    Go to contribution page
  16. Arkadiusz Chłopik (NCBJ-Swierk/JINR)

    Laboratory of High Energy Physics (LHEP) Engineering Support

    Supervisor: MSc. Arkadiusz Chłopik, LHEP Dubna and NCBJ-Świerk Poland
    Contact: a.chlopik@ncbj.gov.pl, chlopik@jinr.ru

    The topic of the exercise
    "The LabVIEW™ program modules Record Generator and Transmitter/Receiver for the Input Output Device Simulator project of the NICA-MPD-PLATFORM"

    Goal
    The...

    Go to contribution page
  17. Maciej Czarnynoga (WUT)

    Thermal optimization of the "Intelligent Power Distributor" using the CFD method.

    Contact to the supervisor: czarnynoga@jinr.ru

    Description of topic:
    The main goal of this internship topic is to conduct heat transfer simulation for Intelligent Power Distributor (IPD) in a few variants of the construction. Base on the simulation optimal variant of construction will be chosen. During the...

    Go to contribution page